Sundown SA v1 Drop-in Recone

(2 customer reviews)

$75.00

 

    • These are recones for the Sundown SA v1 subwoofers with the 2.5″ coil. SA rev1 (original black motor), rev2, rev3, & Classic.
    • These will not fit into the Skar DDX.
    • It will take on average 1 week for your order to be completed.
    • You will receive an email with tracking information as soon as your order ships.
    Replace 16ga terminals for 4ga terminals
    Glue kits include 2oz of CA glue with activator + 2oz of rubberized surround & dust cap glue.
  • $0.00

Category: Tags: , , ,

These drop-in recones are for Sundown SA v1 subwoofers with the 2.5″ coil (original black motor, rev2, rev3 & Classic).
If you are uncertain which version you have, please email us a picture of your sub.

These will not fit into the Skar DDX, however, we do offer custom recones for the DDX.

Our drop-in recones do not include shims or glue.

If you are not 100% sure about reconing, please ask us or send your subwoofer in.


Pointers for installing your new drop-in recone:

  • Regular printer paper trimmed/stacked to spec works great for shimming. Use enough where it is snug but not so tight you can barely get the coil in the gap.
  • For glue, we suggest using our glue kit.
  • Make sure to rough up the glue surface of the dust cap and sand and clean the frame beforehand.
  • For more in-depth information on how to recone, you can check out our how-to recone video.

It will take on average 1 week for your order to be completed.

Once your order is placed, you will receive a confirmation email. No other updates or emails will be sent until your order is completed at which point you will receive an email with tracking information.


We cannot warranty DIY Recone assembly issues.
We can only stand behind the labor that we perform.
Manufacturing defects in the kit itself are our responsibility but installation is 100% customer responsibility (this includes ticking, rubbing, broken parts, etc.).
Thank you for understanding.

 

2 reviews for Sundown SA v1 Drop-in Recone

  1. Austin Fragassi (verified owner)

    These people do absolutely amazing work have bought several cones from the amazing quality love em

  2. James

    I was given an SA15V1R2 recently because my nephew thought his rp2k would run fine on all stock electrical, I just broke the soft parts down and noticed they were much better than the oem SA’s I’ve reconed, so I asked my nephew and he told me this was where he got his recone. It was Much more difficult to disassemble. It was obvious he clipped them to a high temp and the former glue gave out so all the coil was deep in the motor.

Add a review

Your email address will not be published. Required fields are marked *

You may also like…